$3,199.00 – $4,449.00
Pro-L 3D printer
Removable Garolite build plate
2 stainless steel nozzles (0.4mm) installed + 1 spare
USB/SD card combo drive
3D printing toolkit (socket driver, hex driver, print removal tool, cleaning brush, lubricant, bed glue)
2 replacement Bowden tubes
2 replacement Bowden tube push-release connectors
Power cable and USB cable
Pro-L Basic Pack
Plug-and-play control module
WiFi connectivity and remote operation
Further expansion capability (see Expansion Pack product page)
Important note: Filament sensor add-ons are not yet available and are in final testing before delivery. Currently all Expansion Packs are shipped without this add-on; all Expansion Pack customers will receive their sensor add-on units starting in December 2018.
Pro-L Basic Pack
Extra dual-extrusion print head (for fast-swapping different nozzle setups)
Extra removable Garolite build plate
Additional set of nozzle sizes, two each: 0.3mm, 0.6mm, 0.8mm
1-Month Factory Support, engineering and manufacturing support service
PRINTABLE Z-AXIS LAYER RESOLUTION
NUMBER OF NOZZLES
REMOVABLE BUILD PLATE
Fused Filament Fabrication (FFF)
305 x 254 x 330 mm, 12 x 10 x 13 in.
10 microns (0.01 mm or 0.0004 in.)
X-Axis: 10 microns (0.01 mm or 0.0004 in.)
Y-Axis: 10 microns (0.01 mm or 0.0004 in.)
Z-Axis: 0.5 microns (0.0005 mm or 0.0000196 in.)
Up to 275 °C, 527 °F
0.4 mm default, compatible with 0.2 – 1.0 mm
Up to 120 °C, 248 °F, 1/4 in. thick cast aluminum with embedded magnets
Magnetic, removable, steel with variable print surface sheets
TESTED MATERIAL TYPES
1.75 mm, 0.069 in.
Max width of spool 83 mm, 3.25 in.
ABS, PLA, PC-ABS, PC, HIPS, PET+, T-Glase, PETG, PETT, PVA, Nylon, NinjaFlex/TPE/TPU, SoftPLA, Rubber, Conductive PLA, Laywood, “-Fill” type PLA and ABS materials
OFFICIAL SOFTWARE COMPATIBILITY
USB, SD card, WiFi enabled SD card, MatterControl Touch
4 x 20 character LCD display
Encoder dial with push-down switch
Simplify3D, Cura, MatterControl
Powder coated 1/8 in. thick aluminum
Linear axis ball bearings
1.8° step angle
Exchangeable magnetic snap-on module
10.88 kg, 24 lbs
520 mm, 20.5 in.
330 mm, 13 in.
572 mm, 22.5 in.
27 cm, 10.6 in. measured from front of metal chassis base