Download the Simplify3D Beta Profile!
What would you print with a 2×4 foot print area? Current beta profile available for PETG with settings for Coarse, Fast, Balanced, Fine, and Vase-mode. Print settings are not final and may change at a later date.
Follow our Kickstarter!
Enter your email address below to keep up to date with the launch of MacroMAKEiT.
PRINTABLE Z-AXIS LAYER RESOLUTION
NUMBER OF NOZZLES
HEATED BED TEMPERATURE
Fused Filament Fabrication (FFF)
610 x 1400 x 800mm, 24 x 55 x 31in.
100 microns (0.1 mm or 0.004 in.)
X-Axis: 50 microns (0.05 mm or 0.002 in.)
Y-Axis: 50 microns (0.05 mm or 0.002 in.)
Z-Axis: 1 microns (0.001 mm or 0.0004 in.)
Up to 275 °C, 527 °F
1 mm default, compatible with 0.6 – 1.2 mm
Up to 80 °C, 176°F (minimum, may increase during production)
Aluminum with laminated phenolic resin (Garolite) print surface
TESTED MATERIAL TYPES
1.75mm or 3mm
PLA, PLA-based “fill” types, PETG, PETG-based “fill” types, TPU, ABS
OFFICIAL SOFTWARE COMPATIBILITY
USB, SD card, WiFi, LAN,
10″ Android tablet, removable with inductive charging
Android tablet, Bluetooth peripherals, remote terminal
Simplify3D, Cura, Octoprint